On the day of your job, your dedicated installation team will arrive on site at the time that has been confirmed with you at the check measure.

The installation team will assess the building, any existing windows and doors and the area where they will be working to ensure everything is ready for work to begin. The area is prepared and drop sheets are laid where necessary to help prevent any damage.

Removal of the existing door then commences. In this example, panels are removed first to allow access to the frame. BetaView installers are trained professionals and use all required safety equipment (PPE) where required.

Once the old door is removed, the opening is cleaned and prepared for the new door. To maintain a safe and clean working environment, the site is tidied up.

Aluminium angle is carefully measured and cut to the exact size required, then fitted into the opening.

Weather proofing is accurately fitted to protect the home from water.

With the opening prepared, the delivery truck arrives with the new Essential Stacker Door. The new door is then carefully unloaded, checked over and walked through to the opening.

The old door and any rubbish are then loaded onto the truck for removal.

The new Essential Stacker Door is then carefully lifted into position by the installers and appropriately leveled for a true fit.

With the door is place and positioned accurately, it is then fixed in place.

Marking and measuring every step of the way to ensure the frame installed perfectly.

Close-up of the new frame, you can see the fit is absolutely precise to your individual specification.

Final checks before panels are installed.

The remaining panels are then fitted to complete the door.

The fly screen is checked and adjusted to ensure smooth operation following fitting of the door.

Final fixtures are made for a firm and secure fitting, with exterior aluminium angle fitted to cover gaps between the door and building.

A final round of checks is made to approve the door and installation is exact.

The lock is adjusted and cleaned to make sure the machine can operate properly and secure the door.

Once the job is finished, the site is tidied and any excess rubbish is removed.